Reagents for electrophoresis

highQu 1Step RT qPCR master mixes in combination with a blend of thermostable and extremely active Reverse Transcriptase & advanced RNase Inhibitor (RT Mix) allow for a single step one tube RT qPCR. qPCR master mixes are based on the small molecular inhibitor technology Hot Start PCR allowing to achieve highest sensitivity and specificity under both standard and fast qPCR cycling conditions. They provide excellent results on both AT/GC rich templates and guaranty rapid extension with early Ct va

30% ACRYLAMIDE/BIS-ACRYLAMIDE Solutions, Ultra Pure ACR008   DNase/RNase activity: none detected 4° C 30%, 19:1

30% ACRYLAMIDE/BIS-ACRYLAMIDE Solutions, Ultra Pure ACR009 DNase/RNase activity: none detected 4° C 30%, 29:1

30% ACRYLAMIDE/BIS-ACRYLAMIDE Solutions, Ultra Pure ACR010 DNase/RNase activity: none detected 4 °C 30 %, 37.5 : 1

40% ACRYLAMIDE/BIS-ACRYLAMIDE Solutions, Ultra Pure ACR004 DNase, RNase and Protease activity: none detected 4° C 40% 29:1

40% ACRYLAMIDE/BIS-ACRYLAMIDE Solutions, Ultra Pure ACR003 DNase, RNase and Protease activity: none detected 4° C 40% 19:1

40% ACRYLAMIDE/BIS-ACRYLAMIDE Solutions, Ultra Pure ACR005 DNase, RNase and Protease activity: none detected 4° C 40%, 37.5:1

ACRYLAMIDE/BIS-ACRYLAMIDE PREMIX POWDERS 19:1 ACR011 Ultra Pure Acrylamide and bis-Acrylamide powders. Reconstitute with deionized water. 200 g size has a final volume of 500 ml.

ACRYLAMIDE/BIS-ACRYLAMIDE PREMIX POWDERS 29:1 ACR012     29:1   Ultra Pure Acrylamide and bis-Acrylamide powders. Reconstitute with deionized water. 200g size has a final volume of 500ml.

ACRYLAMIDE/BIS-ACRYLAMIDE PREMIX POWDERS 37,5:1 ACR013     37,5:1   Ultra Pure Acrylamide and bis-Acrylamide powders. Reconstitute with deionized water. 200g size has a final volume of 500ml.

ACRYLAMIDE, 40% Solution Ultra Pure ACR006 4° C A 40% (w/v) solution of Ultra Pure Acrylamide in deionized water.

CAS number: [76-06-1] C 3 H 5 NO MW: 71.08 Purity: ≥ 99.5% Conductivity: ≤ 5 μmhos pH (10%, 0.1M NaCl): 6.0-7.0

CAS number: [79-06-1] C 3 H 5 NO MW: 71.08 Purity: ≥ 99.9% Acrylic Acid: ≤ 0.001% Insolubles: < 0.005% Conductivity: ≤ 5 μmhos DNase, RNase activity: none detected Heavy metals (as Pb): max 2ppm

AGAROSE, 3:1 High Resolution Grade AGA201   For the resolution of small nucleic acid fragments and PCR products. Most effective <2000bp. Gel Strength (1.5%): >2000g/cm2 Melting Range (1.5%): 85-89 °C EEO: ≤0.12 Sulfate:≤0.10% DNase, RNase: None detected

AGAROSE, Biotechnology Grade AGA001   Suitable for most Molecular Biology applications. [9012-36-6]

AGAROSE, High Gel Strength AGA501   Ultra Pure, Molecular Biology Grade High gel strength allowing for lower gel concentrations (0.3%) Suitable for Pulse Field Electrophoresis and the separation of high molecular weight DNA at lower concentrations. For general nucleic acid separation. Exceptionally low absorption of staining agents   Gel strength (1%): ≥2000g/cm2 Gelling Range: 36 ±1.5 ° C Melting Range: 88±1.5 ° C Low EEO: ≤0.12 Sulfate: ≤0.12% DNase/ RNase: none detected

AGAROSE, High Resolution Plus AGA401 High resolution of PCR products and DNA fragments in the range of 200 - 800 bp. Stronger gel structure-better gel handling Improved clarity enhanced visibility For best resolution gels must be chilled at 4 °C for 30 minutes before use.

AGAROSE, Low Melt AGA101 Specially modified agarose which allows for the recovery of nucleic acids. Tested for in-gel restriction digestion/ligation and DNA recovery. Highest resolving capacity for large DNA, Typically over 1000 bp.

AGAROSE, Low Melt, PCR Grade AGA103   For fragments ≤1000 bp, PCR products ranging from 200-800 bp. Specially modified low melt agarose which allows for the recovery of nucleic acids. Tested for in-gel restriction digestion/ligation and DNA recovery.   Gel Strength(4%): ≥1000g/cm2 Gelling Temperature: ≤35 ° C Melting Temperature: ≤65.0 ° C Low EEO: ≤0.10 Sulfate: ≤0.12% DNase/ RNase: None detected

AGAROSE, Super Resolution Plus AGA601 High resolution of PCR products and DNA fragments under 500 bp, in particular 25 - 200 bp. Stronger gel structure-better gel handling. Improved clarity enhanced visibility. For best results gels must be maintained at 4 °C for 20 hours before use.