Producers

Tissuel culture plates 6-well TPP, 92006, with a lid, sterile, 126 pcs.

Features of the TPP® tissue culture test plates show highest operational standards quality : opto-mechanical treatment of growth area for optimal cell adhesion lid with air-venting system guarantees controlled gas exchange with low evaporation sloped edge allows placement of the lid in one position only yellow marking area on lid and plate ensure correct lid orientation: yellow on yellow – match! ridged grip area ensures a secure grasp and prevents from accidentally lifting off the lid clear alp

TPP® Tissue culture Clipmax 10cm2 chamber slide, filtr, clip, 70010

Advantages of the tissue culture flask with the peel-off foil: Large pinched flap for a firm grip Foil is peeled off before access to the cultivation chamber Strong welding of peel-off foil Multilayer foil material Stacking ring offers stable and slip-free stapling of several flasks Optionally available with barrier This flask cannot be re-closed after the foil has been peeled-off. The foil is welded securely to the polystyrene carrier. It is important that no «VENT» screw caps are employed – on

Product Description Advantages of the tissue culture flask with the peel-off foil: Large pinched flap for a firm grip Foil is peeled off before access to the cultivation chamber Strong welding of peel-off foil Multilayer foil material Stacking ring offers stable and slip-free stapling of several flasks Optionally available with barrier This flask cannot be re-closed after the foil has been peeled-off. The foil is welded securely to the polystyrene carrier. It is important that no «VENT» screw ca

- Surface activated growth area for optimal adhesion and best proliferation of adherent cells - Suitable for suspension cells - Geometry of the neck reduces risk of media slop over - Stabilizing rim offers secure, slip free piling of several flasks - Highly visible bilateral marking area - White volume graduations on both sides for optic control of the filling volume - Crystal clear transparency - Flasks VENT screw caps - Filter screw caps offer constant sterile gas exchange through the hydropho

Product Description - Surface activated growth area for optimal adhesion and best proliferation of adherent cells - Suitable for suspension cells - Geometry of the neck reduces risk of media slop over - Stabilizing rim offers secure, slip free piling of several flasks - Highly visible bilateral marking area - White volume graduations on both sides for optic control of the filling volume - Crystal clear transparency - Flasks VENT screw caps - Filter screw caps offer constant sterile gas exchange

Flask is available with filter screw cap only. If a «VENT» screw cap is used, a build-up of more than 0.03 bar inside the flask could press open the lid. Product number: 90652 Growth surface (cm 2 ): 115 Version: lid, barrier Lid opening (mm): 105 x 105 Volume (ml): 15 - 33, max. 100 Dimensions (mm): 210 x 122 x 50 Material: PS Qty/bag: 3 Qty/case: 18 Product number: 90552 Growth surface (cm 2 ): 150 Version: lid Lid opening (mm): 105 x 105 Volume (ml): 15 - 45, max. 100 Dimensions (mm): 210 x 1

Product Description Flask is available with filter screw cap only. If a «VENT» screw cap is used, a build-up of more than 0.03 bar inside the flask could press open the lid. Product number: 390652 Growth surface (cm 2 ): 115 Version: lid, barrier Lid opening (mm): 105 x 105 Volume (ml): 15 - 33, max. 100 Dimensions (mm): 210 x 122 x 50 Material: PS Qty/case: 20 Product number: 390552 Growth surface (cm 2 ): 150 Version: lid Lid opening (mm): 105 x 105 Volume (ml): 15 - 45, max. 100 Dimensions (m

Tissue culture flat tube at an angle, PS (made of polystyrene) Sterile. Culture tube, cut side. Cap with filter. A great alternative to 25cm2 bottles! A sensational in form, cut from the sides cell culture tube, combining the advantages of a culture bottle and a centrifuge tube. Now 3 in 1: Tissue culture, Microscopy, Centrifugation . Perfect, for example for lymphocyte culture. In the rack section there are special racks for lying tubes! Volume: 10 ml. Growth area 10 cm2 All in one! Innovative

Tissue culture flat tube at an angle, PS (made of polystyrene) Sterile. Culture tube, cut side. Cap with filter. A great alternative to 25cm2 bottles! A sensational in form, cut from the sides cell culture tube, combining the advantages of a culture bottle and a centrifuge tube. Now 3 in 1: Tissue culture, Microscopy, Centrifugation . Perfect, for example for lymphocyte culture. In the rack section there are special racks for lying tubes! Volume: 10 ml. Growth area 10 cm2 All in one! Innovative

The tissue culture tubes are an extension to the tissue culture flask product range. Perfectly clear, sterile tubes for cell culture, perfect for the cultivation of lymphocytes and other cells. Thanks to a special screw cap, the tissue culture tubes cannot roll away, which guarantees a return to the previous position. The tube is treated for culture growth over a length of 50 mm and provides a growth area of ​​20 cm2. All products are sterile, gamma sterilized. They are pyrogen, RNA, DNA, RNase

The tissue culture tubes are an extension to the tissue culture flask product range. Perfectly clear, sterile tubes for cell culture, perfect for the cultivation of lymphocytes and other cells. Thanks to a special screw cap, the tissue culture tubes cannot roll away, which guarantees a return to the previous position. The tube is treated for culture growth over a length of 50 mm and provides a growth area of ​​20 cm2. All products are sterile, gamma sterilized. They are pyrogen, RNA, DNA, RNase

TubeSpin ® bioreactors are ideal for large-scale screenings and optimizing of suspension cell system process developments . The important parameters for the production upscaling can be evaluated with small amounts. This lowers the cost and increases the efficiency of the process. A system for carrying out, testing, scaling and optimizing suspension cell culture processes. Scaling the process from 15ml to 600ml. Cap with filter. 50ml tubes have different diameter holes in the cap, allowing for cu

TubeSpin ® bioreactors are ideal for large-scale screenings and optimizing of suspension cell system process developments . The important parameters for the production upscaling can be evaluated with small amounts. This lowers the cost and increases the efficiency of the process. A system for carrying out, testing, scaling and optimizing suspension cell culture processes. Scaling the process from 15ml to 600ml. Cap with filter. 50ml tubes have different diameter holes in the cap, allowing for cu

Available volumes: 150ml, 250ml, 500ml and 1000ml. 0.22 μm PES filter with minimal protein binding. The square shape of the filter provides 20% more filtering area compared to circular filters, which increases the filtering speed. All products are sterile, gamma sterilized. They are pyrogen, RNA, DNA, RNase and DNase free. What makes the TPP filtration system unique: Large quadratic filter surface of 49 cm 2 and 69 cm 2 respectively Special lamella grid support and premium PES filter membrane, p

trans-4-HYDROXY-L-PROLINE HYP686 Suitable for tissue culture CAS number: [51-35-4] C5H9NO3 MW: 131.1 Purity: min. 99.0%

Transfer pipettes are used for transfering diagnostic sample material from one vessel to another. This allows fluids such as urine, blood, serum and plasma to be transferred for subsequent analysis. Transfer pipettes are used when it is not necessary for the sample volume to be exact. If exact volumes are needed, piston pipettes with suitable pipette tips should be used. No special ambient conditions are required. Transfer pipettes with an integrated suction bulb are available in nine different